|
We offer you the following products: Barbed reinforced wire of the type BTO-16 (Egoza).
Barbed reinforced wire has a diameter of 3.8 mm and is supplied in coils. It is intended for fencing the protected area and manufacturing barbed-cutting barriers.
Barbed reinforced wire, which is often used as a means of security, is a type of fence wire made of metal strips with sharp edges, combined with a wire core.
Barbed-cutting reinforced tape is made of galvanized high-carbon wire with a diameter of 2.8 mm and galvanized steel with a thickness of 0.5 mm, which provide the reinforced barbed tape with high strength, a high level of protection against rust and corrosion, medium weight and reasonable cost.
TECHNICAL SPECIFICATION
for barbed wire type BTO-16 (Egoza)
|
Name of indicators
|
Indicators
|
|
Bobbin diameter in transport form, mm
|
not less than 1100мм+-20
|
|
Circle diameter in working view, mm
|
at least 900
|
|
Number of connection points on the circle (number of staples)
|
7
|
|
The number of turns in the bobbin is not less
|
not less than 100
|
|
Diameter of the main wire, mm
|
2.8+0,02
|
|
Recommended stretch length
|
20 m
|
|
Maximum stretch length
|
25 m
|
|
Barbed type blade shape
|
Aggressive, radius of rounding of the base of the blade on a barbed tape
|
|
Bobbin weight
|
up to 35 kg
|
|
Connecting staples
|
3 EN galvanized steel with a width of at least 10 mm. with a thickness of at least 1.5 mm DX51D equivalent to EN 10346 :2015
|
|
Staple length
|
not less than 45 mm
|
|
Zinc coating density of staple
|
not less than 140 g/m²
|
|
Cutting blades (Type material)
|
Made of 3 galvanized steel with a thickness of 0.55 mm +0,05 mm.
DX51D or equivalent to EN 10346:2015
|
|
Barbed tape blade length
|
16 mm
|
|
The width of the barbed tape
|
not less than 19 mm
|
|
The width of the middle strip of barbed tape for wire crimping
|
not less than 7.5 mm
|
|
The pitch of the teeth of the barbed tape
|
no more than 30 mm
|
|
Zinc coating density barbed tape
|
not less than 140 g/m2
|
|
Zinc wire standard
|
in accordance with EN 50189 (GOST 9850-72) with a coating with a density of 140 g/m2, hot-dip galvanizing (ESEN-10264-2 (DIN 48200 or DIN 2078)
|
|
Force of temporary resistance to rupture
|
Not less than 1600N/ mm²
|
Drawing of barbed wire type BTO-16 (Egoza)
Тechnical parameters of the barbed wire type BTO-16 (Egoza), 20-25 m spool, requirements for manufacturing, testing, chemical composition of the material, packaging, marking, transportation and storage must meet the requirements of the relevant standards.
Guaranteed continuous operating period - 3 years;
Guaranteed storage period - 5 years.
|
          
|